How to reduce the wear of the conveyor belt

1. Improve the conveyor belt blanking device. The ability to pass foreign objects is increased by 2.5 times, long and large foreign objects are not easily stuck between the funnel wall and the conveyor belt during the conveying process, and the probability of foreign objects tearing the conveyor belt is reduced. The guide skirt at the blanking hopper makes the gap between the conveyor belt and the conveyor belt larger and larger along the running direction of the conveyor belt, which solves the problem of coal lump and material block stuck between the conveyor belt and the baffle, and eliminates the problem caused by this. Conveyor belt damage. The hopper with a large drop has an internal buffer baffle to prevent the material from directly impacting the conveyor belt.

2. Add a scraping device to the drum. Any scraping device can be installed at the reversing roller along the conveyor belt to eliminate the problem of material adhesion at the reversing roller and solve the local damage of the conveyor belt caused by the sticking of the roller.

3. The claw pulley at the transition of the conveyor. Practice has proved that the transverse strength of the steel rope conveyor belt is lacking. When starting, the claw pulley causes the conveyor belt to be partially stressed, which causes the conveyor belt to be torn. Changing it to a roller can completely solve this problem.

4. The improvement of the conveyor head, tail and intermediate transfer transition. The transition length and transition mode of the conveyor head, tail and intermediate transfer point have a great impact on the service life of the conveyor belt. Reasonable transition design must be carried out. It is necessary to reduce the wear of the rubber surface of the conveyor belt as much as possible to ensure that the conveyor belt does not fold or bulge in the middle, and there is no material leakage at the blanking place.